CompuLab Trim-Slice Manuale Utente Pagina 11

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 24
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 10
Interfaces and Connectors
Revised July 2011 Trim-Slice 11
3.4 Audio Subsystem
3.4.1 Analog Audio
The Trim-Slice analog audio subsystem is implemented with Texas Instruments TLV320AIC23b
audio codec. The analog audio subsystem supports the following features:
Single ended stereo-line output
Single ended stereo-line input
Integrated electret-microphone biasing and buffering solution
-kHz 96-kHz Sampling-Frequency Support
-dB SNR multi-bit Sigma-Delta DAC (A-weighted at 48 kHz)
-dB SNR multi-bit Sigma-Delta ADC (A-weighted at 48 kHz)
The audio codec is connected to the Tegra2 I2S-0 port.
Analog line output is routed to the audio jack P4. Analog line input is routed to the audio jack P5.
Table 6 Audio Characteristics
Parameter
Test conditions
Min
Typ
Max
Unit
Headphone Output
-dB full-scale output voltage
1.0
Vrms
Maximum output power, PO
Rload = 32Ω
30
Rload = 16Ω
40
Signal-to-noise ratio, A-weighted (see
Note 2)
90
97
dB
Total harmonic distortion
1kHz output
Pout = 10mW
0.1
%
Pout = 20mW
1.0
%
Power supply rejection ratio
1 kHz, 100 mVp-p
50
dB
Programmable gain
1 kHz output
-73
6
Programmable-gain step size
1
Mute attenuation
1 kHz output
80
Line Input to ADC
Input signal level (0 dB)
1.0
Vrms
Signal-to-noise ratio, A-weighted, 0-dB
gain (see Notes 1 and 2)
Fsample = 48 kHz.
85
90
dB
Dynamic range, A-weighted, −60-dB
full-scale input (see Note 2)
85
90
dB
Total harmonicdistortion, −1-dB input,
0-dB gain
-80
dB
Power supply rejection ratio
1 kHz, 100 mVp-p
50
dB
ADC Channel Separation
1 kHz input tone
90
dB
Programmable-gain step size
Monotonic
1.5
dB
Mute attenuation
0dB, 1 kHz input tone
80
dB
Input resistance
12 dB input gain
10
20
kΩ
0 dB input gain
30
35
Input capacitance
10
pF
For additional details, please refer to the TLV320AIC23B datasheet, available from
http://focus.ti.com/.
Vedere la pagina 10
1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 23 24

Commenti su questo manuale

Nessun commento